Peachtree Nova150 Amplifier
Original price was: $1,699.00.$1,599.00Current price is: $1,599.00.
• 150 watts per channel
• Reference 9018K2M SABRE32 DAC
• Moving magnet phono stage
• Home Theater Bypass
• Direct iOS input
Sale!
Description
Integrated Amplifier with DAC
Nova150 $1,599 In stock
| SPEAKER OUTPUT | |
|---|---|
| Compatible Speakers | 2.5-16Ω |
| Output Power (WPC, 8Ω | 4Ω, <1% THD+N, AES17) | 150 | 250 |
| Dynamic Range (A-weighted) | 105dB |
| Damping Factor (1kHz, 8Ω) | >600 |
| Frequency Response (20 – 20kHz) | <+/-0.4dB |
| Inter-Modulation Distortion | >80dB below fundamental |
| Total Harmonic Distortion (AES17, 1kHz, 4Ω) | 0.008% |
| Channel Separation (1kHz, 8Ω) | >90dB |
| PREAMP OUTPUT | |
| Output Voltage (rms) | 3.8V |
| Output Impedance | 100Ω |
| Signal-to-Noise Ratio (Analog | Digital Source, un-weighted) | 105dB | 105dB |
| Channel Separation (1kHz) | >115dB |
| Frequency Response (Analog | Digital Source, 8Hz-20kHz) | <0.1dB | <0.5dB |
| Total Harmonic Distortion | 0.003% (2V rms, 1kHz, un-weighted) |
| HEADPHONE OUTPUT | |
| Output Power (32Ω, rms | peak) | 750mW | 1600mW |
| Output Power (300Ω, rms | peak) | 130mW | 275mW |
| Output Power (600Ω, rms | peak) | 64mW | 135mW |
| Output Impedance | 1Ω |
| Signal-to-Noise Ratio (Analog | Digital Source, un-weighted) | 107dB | 106dB |
| Dynamic Range (Analog | Digital Source, un-weighted) | 107dB | 100dB |
| Channel Separation (1kHz) | >100dB at 1kHz |
| Frequency Response (Digital source, 8Hz-20kHz) | <0.5dB |
| Frequency Response (Analog source, 8Hz-100kHz) | <0.1dB |
| Total Harmonic Distortion | 0.003% (2V rms, 1kHz, un-weighted) |
| USB-B Input | |
| Formats | PCM and DSD |
| PCM Sampling Rate and DSD Frequency Rate | 16-32 Bit, 44.1-384kHz PCM 2.8224-5.6448MHz DSD |
| COAX and OPT Inputs | |
| Formats | 16-24 Bit, 44.1-192kHz PCM |
| AUX Inputs | |
| Maximum Voltage (rms | peak-to-peak) | 3.5V | 10V |
| Impedance | 100kΩ |
| PHONO Input | |
| Maximum Input Voltage (rms) | 120mV |
| Impedance | 47kΩ |
| RIAA EQ | No rumble filter used |
| LOOP Output and Input | |
| Maximum Voltage (rms | peak-to-peak) | 3.5V | 10V |
| Impedance (input | output) | 100kΩ | 100Ω |
| AC Power | |
| AC Input | 100-240VAC, 50/60Hz |
| Maximum Power Consumption | 400W |
| On Mode (Idle) Power Consumption | 15W |
| Standby Mode Power Consumption | <0.5W |
| Fuse | 100-120VAC: 6.3A/250V IEC time lag high breaking capacity 220-240VAC: 3.15A/250V IEC time lag enhanced breaking capacity |
| Physical | |
| Height (including feet) | 4.37 inches | 111 mm |
| Width | 14.02 inches | 356 mm |
| Depth (including volume knob and speaker binding posts) | 13.25 inches | 336.55 mm |
| Weight (shipping weight) | 15 lbs (19 lbs) | 6.8 kg (8.6 kg) |
| Warranty | |
| Parts and Labor | Two years Three years if registered online |
